HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
The command cannot be executed because an I/O error occurred.
message-text (string)
Message text
xxx (decimal number)
Command code of the command that was executing when the
error occurred
See the command code description in the explanation of the
YKZ201E message.
yyy (string)
Maintenance information
An I/O error occurred. (detail=mes-
sage-text, cmd=xxx, pos=yyy)
YKZ206E TSO RC=0
The command cannot be executed because a Core processing error
occurred.
message-text (string)
Message text
The message text will be as shown below:
• If an OS macro error occurred:
xxxxxxxx macro error, return code = rr, devn =
dddd
xxxxxxxx: OS macro name
rr: Return code from the macro
dddd: device number
• If system name acquisition failed:
ASASYMBM macro error, rc = rr
rr: Return code of ASASYMBM macro
• If the log stream definition is not DASD-dedicated:
Not DASD-only Logger definition
• If the MAXBUFSIZE of the log stream definition is not 64000:
MAXBUFSIZE of Logger definition invalid
• If this message is displayed as maintenance information (1):
ENTRYID ( eeeee ) for MSGID ( nnn ) is invalid
eeeee, nnn: Maintenance information
• If this message is displayed as maintenance information (2):
ENTRYID ( eeeee ) for TYPE ( ttt ), LEVEL ( lll
) is invalid
eeeee, ttt, lll: Maintenance information
xxx (decimal number)
Command code of the command that was executing when the
error occurred
See the command code description in the explanation of the
YKZ201E message.
yyy (string)
Maintenance information
# If this message is output when the log and trace are obtained, the
RC is 0.
A Core process error occurred. (de-
tail=message-text, cmd=xxx,
pos=yyy)
YKZ207E MSG TSO
CON SC=52 RC=44
#
Messages 167