HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
After an entry of the MODIFY command, an error was detected in the
command or operand shown as text.
Check, and, if necessary, revise the command.
error-type
• COMMAND: Indicates that an error was detected in the command.
• OPERAND: Indicates that an error was detected in the operand.
INVALID error-type: text
YKY102I CON
The entered command has a syntax error.
Check, and, if necessary, revise the command.
COMMAND SYNTAX ERRORYKY103I CON
The specified operand is invalid.
Correct the error and then re-enter the operand.
OPERAND IS INCORRECTYKY104I CON
The value of the initialization parameter has been changed. The
parameter name is given in parameter-name.
parameter-name WAS
CHANGED
YKY111I CON
This message displays the current value of the initialization parameter.
parameter-name
Initialization parameter name
parameter-value
Initialization parameter value
parameter-name=parameter-
value
YKY114I CON
This message displays the TCP/IP session number. This message is
followed by the TCP/IP session information.
session-number
Session identification number
SESSION NO.=session-number
YKY130I CON
This message displays the port number and IP address of the local or
remote host. This message is followed by the TCP/IP session information.
host-type
The type of host with the TCP/IP session information displayed
• LOCAL: Indicates that the host is a local host.
• REMOTE: Indicates that the host is a remote host.
port-number
• When LOCAL is displayed in host-type:
The port number of the local host
• When REMOTE is displayed in host-type:
The port number of the remote host
IP-address
• When LOCAL is displayed in host-type:
The IP address of the local host
• When REMOTE is displayed in host-type:
The IP address of the remote host
host-type PORT=port-number
HOST=IP-address
YKY131I CON
This message displays the time the corresponding TCP/IP session was
established. This message is followed by the TCP/IP session information.
YYYY/MM/DD hh:mm:ss
Time (local time)
CONNECTING START
TIME=YYYY/MM/DD hh:mm:ss
YKY132I CON
Messages150