HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
Nothing is assigned to the SN parameter.
No serial# SN() supplied
YKX101E MSG
SC=48
The last character of the MSG parameter is not a period.
stem
Stem name assigned to the MSG parameter
Messages MSG(stem) does not in-
clude trailing "."
YKX102E TSO RC=48
The specified parameter combination is invalid.
For details about the combination of parameters, see the description
of the YKBLDCMD command or the YKDELCMD command in the HP XP7
for Business Continuity Manager Software Reference Guide.
Parameter combination is invalid
YKX103E MSG
SC=48
The device specified in the DEVN parameter does not exist, or a device
other than DASD or a PAV ALIAS volume has been specified.
Device# DEVN() is not found
YKX104E MSG
SC=48
The value specified in the APID parameter is not in hexadecimal format.
APID() not valid hex
YKX108E MSG
SC=48
The value specified in the CCA parameter is not in hexadecimal format.
CCA() not valid hex
YKX108E MSG
SC=48
The value specified in the CU parameter is not in hexadecimal format.
CU() not valid hex
YKX108E MSG
SC=48
The value specified in the DEVN parameter is not in hexadecimal format.
DEVN() not valid hex
YKX108E MSG
SC=48
Access to the REXX variable identified by name failed.
For details about the return code, see IKJCT441 in the TSO/E
Programming Services.
nnnn
Error code returned upon REXX access
REXX failure return code=nnnn
starting with variable name
YKX110E TSO RC=40
The route list to be processed was not found.
Review the ROUTE and DAD parameters, route list definition file, and
command device definition file you specified when executing the
YKLOAD command.
Necessary Route List is not found.
YKX166E MSG
SC=48
The YKDELCMD command terminated with the return code nnnn and
the reason code rrrr.
YKDELCMD command return
code=nnnn, reason code=rrrr
YKX199I TSO
Table 30 List of messages (message ID YKX2x)
Explanation and recommended actionsMessage textMessage ID
Invalid parameters are specified.
For details, see the reason code in the YKX299I message that will
appear after this message. For reason codes, see IKJPARS in the TSO/E
Programming Services.
Supplied parameters invalidYKX200T TSO RC=48
Nothing is assigned to the CCA parameter.
No command control address CCA()
supplied
YKX201E MSG
SC=48
Nothing is assigned to the CU parameter.
No control unit# CU() supplied
YKX201E MSG
SC=48
Messages146