HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
A description for the specified error code was not found.
For details about error codes, see XXX. If the error code is not listed in
the manual, contact your HP Technical Support or authorized service
provider.
A description for the specified error
code was not found.
YKM765I ISPF
The specified prefix is being used by another program.
Check the value specified for the prefix.
Specified Prefix is being used by
another program.
YKM766E ISPF
The command cannot be executed for Continuous Access copy groups
with the HyperSwap attribute.
Execute the PPRC copy pair operation from TPC-R.
This command is invalid for Continu-
ous Access Copy Groups linkaged
with HyperSwap.
YKM767E ISPF
If a consistency group ID is specified, you cannot specify HS for the
linkage option.
HS cannot be used when C/T ID is
specified.
YKM768E ISPF
The route label must be an asterisk (*), or a combination of one or
more qualifiers. Each qualifier must be from 1 to 8 alphanumeric
characters (0-9, A-Z, a-z), and must begin with an alphabetic character
(A-Z, a-z). The length of the route label must be from 1 to 8 characters.
Route Label must be an asterisk (*),
or a combination of one or more
qualifiers. Each qualifier must be 1-
8 alphanumeric characters (0-9, A-
Z, a-z) with the first character being
an alphabetic character (A-Z, a-z).
The length of Route Label must be 1-
8.
YKM769E ISPF
Enter a value that is unique within the storage system.
Enter unique value in a storage sys-
tem.
YKM770E ISPF
The panel cannot be scrolled because the start of the data is already
being displayed.
Panel could not scroll because it
shows beginning of data.
YKM771I ISPF
The panel cannot be scrolled because the end of the data is already
being displayed.
Panel could not scroll because it
shows end of data.
YKM772I ISPF
The dataset name of the disk configuration file exceeded the 44-char-
acter limit. Shorten the device address domain ID.
DADID must be shortened so that
dataset name of disk configuration
file is no more than 44 characters.
YKM773E ISPF
The specified storage system is already defined in the route. Select a
different storage system.
Specified storage system is defined
in the same route.
YKM774E ISPF
The storage system cannot be added because the number of storage
systems defined in the route is already at the maximum.
Panel could not proceed the insert
action because number of the route
entry has reached maximum.
YKM775E ISPF
Messages 123