HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
The system does not recognize the Level attribute level of the APIInfo
element that exists on the line with the line number identified by rec#
in the file identified by file.
Check the indicated line, and then identify the cause of the problem
by referring to information contained in the XML document type
definitions, in the HP XP7 for Business Continuity Manager Software
Reference Guide.
file
Name of the configuration file where the error was detected
rec#
Number of the line in the file identified by file where the error
was detected
v.r.m
API level
For details about this value, see the information about the XML
document type definitions in the HP XP7 for Business Continuity
Manager Software Reference Guide.
APIInfo Level=level invalid. Suppor-
ted level is v.r.m.
YKL077W MSG
SC=4 RC=4
(file:rec#)
An attempt to assign the value value to the variable name failed with
the result value identified by result. This error can be caused by an
invalid value being specified for the STEM parameter.
YKVSET program failure for: name
= value
YKL079E MSG
SC=44 RC=44 (res-
ult)
Only two copy pair elements are allowed: the first element for the P-VOL
and the second element for the S-VOL.
Check the line with the line number identified by rec# in the file
identified by file, and then identify the cause of the problem by
referring to information contained in the XML document type definitions,
in the HP XP7 for Business Continuity Manager Software Reference
Guide.
file
Name of the configuration file where the error was detected
rec#
Number of the line in the file identified by file where the error
was detected
More than two DiskDevice Elements
in CopyPair.
YKL080E MSG
SC=36 RC=36
(file:rec#)
The YKLOAD program failed to resolve the unit number (device address)
of the P-VOL in the specified CopyPair. For configuration definition,
this process uses the Host Discovered Array object in the primary device
address domain. For other purposes, the current host device address
domain is used. The situation represented by this message is not always
fatal. Some CLI commands, such as YKSUSPND, can be successfully
executed by using only the S-VOL unit address.
pair-index
See the pair index description in the explanation of the YKE003E
message.
Unable to resolve primary device
address.
YKL081W MSG
SC=16 RC=16
(pair-index)
Messages106