HP XP7 Command View Advanced Edition Installation and Configuration Guide (TK981-96001, May 2014)

ActionDescription
Return value
(hexadecimal)
The syntax of the installation command argument is incorrect.
Correct the syntax, and then perform the installation again.
The installation command
contains a syntax error.
0x91
The installation directory has been specified using characters
that cannot be used, or exceeds 64 bytes. Correct the setting,
and then perform the installation again.
The specified value for the
installation directory is not
correct.
Installation failed. Perform the following, depending on the
cause of the error:
• HDVMAgent.conf is not stored in the directory in which
the installer execution file is stored.
Store HDVMAgent.conf in the directory in which the in-
staller execution file is stored and run the installation again.
• HDVMAgent.conf contains some setting errors.
Correct the errors and run the installation again.
HDVMAgent.conf is not
stored in the directory in
which the installer execu-
tion file is stored, or HD-
VMAgent.conf contains
some setting errors.
0x92
For an environment in which the GUI for Hitachi Dynamic Link
Manager has been installed, contact maintenance personnel
for assistance.
The Device Manager
agent was successfully in-
stalled, but the settings for
linking to other program
products could not be ap-
plied.
0x93
Verify that the operating system is supported and the required
updates have been applied, and then perform installation
again.
The Device Manager
agent functionality setup
succeeded. However, an
error might have occurred
while setting up Replica-
tion Manager application
agent functionality.
0x95
Retry the operation using a user ID with Administrator permis-
sions.
The user attempting this
operation does not have
Administrator permis-
sions.
0x96
None.
You cannot downgrade
the Device Manager
agent because a newer
version of the Device
Manager agent is in-
stalled.
0x98
Take action by following the KAIC25111-W to KAIC25113-
W messages.
The Device Manager
agent or a related pro-
gram is running.
0x99
Take action by following the KAIC25156-E message.
setup.exe might not
have started correctly, or
a user might have run an
internal command manu-
ally.
0x9A
Unattended installation and removal120