HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

XP12000/
XP10000/
SVS200
XP24000/
XP20000
P9500HP XP7DescriptionValues
--YYY
ESAM Svol Read Option
Specify this value when both of
the following conditions are
satisfied:
• External Storage Access
Manager is used.
• You do not want a failover to
occur from the MCU to the
RCU when an application is
executed, for which the num-
ber of Read commands to be
issued to the secondary
volume is equal to or more
than the threshold value.
48
----YY
BB Credit Set Up Option1
Specify this value when you want
to use BB Credit virtualization to
improve Continuous Access
performance.
49
----YY
BB Credit Set Up Option2
Specify this value when you want
to use BB Credit virtualization to
improve Continuous Access
performance.
50
----YY
Round Trip Set Up Option
Specify this value when you want
to use Round Trip to improve
Continuous Access performance.
51
----YY
ESAM and Cluster Software for
SCSI-2 Reserve
Specify this value when cluster
software is used that uses SCSI-2
Reserve in a configuration that
uses External Storage Access
Manager.
52
--YYY
Support Option for the
EXTENDED COPY command
Specify this value when you want
to use VMware ESX Server.
If you are using P9500,
microcode version
70-01-4X-XX/XX or later is
required.
54
Command reference76