HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

DescriptionAttribute
Combination of data drives and parity drives in a RAID configuration.
For HP XP7 or P9500, if the pool is a THP pool, this item is output in the format
xD+yP or xD+xD.
• xD: Number of data drives
• yP: Number of parity drives
Unknown is output if the combination is unknown.
Unknown is output if any of the following conditions are satisfied:
• The combinations of data drives and parity drives are unknown
• The combinations of data drives and parity drives are mixed
• RAID levels are mixed
A space is output for other cases.
combination
Currently, this information does not apply to storage systems (-1 is output).volAlertNotice
Over-provisioning percent (%)
If the storage system is HP XP7, P9500, or XP24000/XP20000 and
poolFunction is 5, the ratio of the total size of all THP volumes compared to
the THP pool size is output.
This value is output as a whole number.
This information is invalid for other cases (-1 is output).
overProvisioningPer-
cent
Over provisioning warning threshold (%)
If the storage system is HP XP7, P9500, or XP24000/XP20000 and
poolFunction is 5, the threshold used to issue an advance warning for the
over-provisioning percent is output.
This information is invalid for other cases (-1 is output).
overProvisioning-
Warning
Over provisioning limit threshold (%)
If the storage system is HP XP7, P9500, or XP24000/XP20000 and
poolFunction is 5, the threshold used to report an excess limit for the
over-provisioning percent is output.
This information is invalid for other cases (-1 is output).
overProvisioningLim-
it
Drive revolutions per minute
If the storage system is HP XP7 or P9500 and a THP pool is used, the rotational
speed (RPM) is output.
-1 is output if any of the following conditions are satisfied:
• The drive speed is unknown
• Drives with different drive speeds are mixed
• Drive types are mixed
This information is invalid for other cases (-1 is output).
rpm
Output items466