HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

DescriptionAttribute
Currently, this information does not apply to storage systems (-1 is output).
managementAreaPool-
ID
External LDEV tier rank
This attribute is output only when the THP/Smart pool volume is used as an external
volume in HP XP7 or P9500 (with a microcode version 70-04-00-XX/XX or later).
externalTierRank
#1
When the THP/Smart volumes are not assigned to a THP/Smart pool, -1 is displayed.
#2
When the operator is a partitioned storage administrator, -1 is displayed.
MFReplicationInfo instance
Commands for which an MFReplicationInfo instance is output
• GetStorageArray (subtarget=MFReplicationInfo) , page 208
Table 156 MFReplicationInfo instance attributes
DescriptionAttribute
Object ID of MFReplicationInfoobjectID
Serial number of the storage system containing the P-VOL
pvolSerialNumber
Type of the storage system containing the P-VOL
If the storage system containing the P-VOL is not registered, Unknown is output.
pvolArrayType
Device number of the P-VOL
pvolDevNum
Device number of the P-VOL
For HP XP7, P9500, or XP24000/XP20000:
The value is output in the ww:xx:yy format, where ww is the logical DKC
number, xx is the CU number, and yy is the LDEV number.
For XP12000/XP10000/SVS200:
The value is output in the xx:yy format, where xx is the CU number and yy
is the LDEV number.
displayPvolDevNum
P-VOL object ID
pvolObjectID
ID of the pool containing the P-VOL
If the value of replicationFunction is UniversalReplicatorForMF, a
journal group ID is output.
-1 is output for other copy types.
pvolPoolID
Serial number of the storage system containing the S-VOL
svolSerialNumber
Type of the storage system containing the S-VOL
If the storage system containing the S-VOL is not registered, Unknown is output.
svolArrayType
CLI Reference Guide 455