HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

DescriptionAttribute
Indicates whether the data that is stored in the LDEV is encrypted.
One of the following values is output for HP XP7, P9500, XP24000/XP20000,
or XP12000/XP10000/SVS200:
• 0: The data is not encrypted.
• 1: The data is encrypted.
-1 is output for other storage systems.
encrypted
Capacity (KB) that has been assigned to THP/Smart volumes from the hardware
tier whose ID (tierID) is 0
thpTier0ConsumedCa-
pacityInKB
Capacity (KB) that has been assigned to THP/Smart volumes from the hardware
tier whose ID (tierID) is 1
thpTier1ConsumedCa-
pacityInKB
Capacity (KB) that has been assigned to THP/Smart volumes from the hardware
tier whose ID (tierID) is 2
thpTier2ConsumedCa-
pacityInKB
Tiering policy applied for Smart volumes
This attribute is valid only when Smart volumes are used in HP XP7 or P9500.
For details about the output values, see the tieringpolicy parameter in Table
94.
tieringPolicy
Indicates whether a Smart volume is subject to hardware tier relocation.
This attribute is valid only when a Smart volume is used in HP XP7 or P9500.
• enable: Subject to hardware tier relocation
• disable: Not subject to hardware tier relocation
tierRelocation
External LDEV tier rank
This attribute is output only when the THP/Smart pool volume is used as an external
volume in HP XP7 or P9500 (with a microcode version of 70-04-00-XX/XX or
later).
externalTierRank
Resource group ID of the physical resource group to which the LDEV belongs
resourceParti-
tionUnitID
New page assignment tier
• High: Assign new pages preferentially to a higher tier.
• Middle: Assign new pages preferentially to a middle tier. (If only two tiers
are in use, assign to the higher tier.)
• Low: Assign new pages preferentially to a lower tier.
newPageAssignmentTi-
er
Relocation priority
• Default: Do not relocate data preferentially.
• Prioritized: Relocate data preferentially when executing hardware tier
relocation.
relocationPriority
#1
When the THP/Smart volumes are not assigned to a THP/Smart pool, -1 is displayed.
#2
When the operator is a partitioned storage administrator, -1 is displayed.
Output items448