HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

DescriptionStatusParameter name
Type of the Device Manager object from which the URLLink is
deleted
One of the following values can be specified. The values are not
case-sensitive.
• smi-s: SMI-S enabled storage system
• other: Device Manager object other than an SMI-S enabled
storage system
If this parameter is omitted, other is set.
Optional
targetoption
#1
Specify either objectid or linkedid. Do not specify both parameters at the same time. If they
are specified at the same time, an error occurs.
#2
The DeleteURLLink command only deletes URLLinks set by a user. The command cannot delete
URLLinks that are automatically set by the Device Manager server when an SMI-S enabled storage
system is initially registered.
Command execution example
hdvmcli DeleteURLLink -o "D:\logs\DeleteURLLink.log"
"objectid=*****"
"targetoption=smi-s"
*****: The value is encoded by the CLI.
Command execution result
RESPONSE
(Command completed; empty list returned)
GetAlerts
The GetAlerts command obtains alerts that are managed by the Device Manager server.
NOTE:
• Device Manager can manage a maximum of 500,000 alerts in the entire system. If the number
of alerts exceeds 500,000, the oldest alerts start to be automatically deleted.
• HP recommends periodically managing the number of alerts for each source (source). As a
guide, delete unnecessary alerts when the number of alerts from a source reaches 10,000 . For
details about deleting alerts, see “DeleteAlerts” on page 373.
• The GetAlerts command can obtain a maximum of 50,000 alerts. If the number of alerts in
the entire system exceeds 50,000, specify parameters to filter the alerts. The filter conditions you
can specify are the alert source (sourcefilter), the time the alert was generated (timefil-
ter), and the number of alerts to be obtained (countfilter).
CLI Reference Guide 375