HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

DescriptionStatusParameter name
New model of the path's storage system
Omit this when no change is required.
Optional
model
New name of the HostInfo
Omit this when no change is required.
You can use a character string of 1-50 bytes for the name.
Optional
hostname
New IPv4 IP address of the host
Omit this parameter if you are not changing the IPv4 IP address
of the host.
Optional
ipaddress
New IPv6 IP address of the host
Omit this parameter if you are not changing the IPv6 IP address
of the host.
Optional
ipv6address
New mount point on the host file system corresponding to the
path
Omit this when no change is required.
Optional
mountpoint
New port on the path
Omit this when no change is required.
When this is changed, port or portname must be specified.
Do not specify both parameters at the same time. If they are
specified at the same time, an error occurs.
Optional
port
New port name of the path
Omit this when no change is required.
When this is changed, port or portname must be specified.
Do not specify both parameters at the same time. If they are
specified at the same time, an error occurs.
Optional
portname
New domain ID of the path
Omit this when no change is required.
This parameter can be specified in decimal and hexadecimal. If
you specify a hexadecimal number, add the 0x prefix.
The execution results are output in decimal.
Optional
domain
New device number of the path
Omit this when no change is required.
For HP XP7, P9500, and XP24000/XP20000:
Specify this parameter as a decimal number or colon-delim-
ited hexadecimal number in the format ww:xx:yy, where
ww is the LDKC number, xx is the CU number, and yy is the
LDEV number. ww is optional. If ww is omitted, LDKC is as-
sumed to be 0.
For XP12000/XP10000/SVS200 and XP1024/XP128:
Specify this parameter as a decimal number or colon-delim-
ited hexadecimal number in the format xx:yy, where xx is
the CU number, and yy is the LDEV number.
The execution results are output in decimal.
Optional
devnum
CLI Reference Guide 365