HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

Parameters
Table 95 ModifyVLDEV command parameters
DescriptionStatusParameter name
Specify an operation to be performed to the virtual LDEV.
The following are the specifiable values:
• mapvid: The virtual device number is registered in the virtual
LDEV.
• unmapvid: The virtual device number is deleted from the
virtual LDEV.
• mapvattr: Virtual information is registered in the virtual LDEV.
• unmapvattr: Virtual information is deleted from the virtual
LDEV.
You can specify the mapvid and mapvattr parameter values,
and the unmapvid and unmapvattr parameter values at the
same time. To specify multiple parameters, separate them by
using commas (,).
An error occurs if the virtual LDEV status and the specified
parameter value are the same.
For example, an error occurs if mapvid is specified for a virtual
LDEV whose virtual device number has already been set, or if
unmapvid is specified for a virtual LDEV that does not have a
virtual device number.
Required
vldevoperation
Serial number of the storage systemRequired
serialnum
Model of the storage systemRequired
model
Resource group ID of the virtual resource group
Specify the resource group ID of the virtual resource group to
which the virtual LDEV to be updated belongs.
Required
vrpuid
Device number of the virtual LDEV
Specify this parameter as a decimal number or colon-delimited
hexadecimal number in the format ww:xx:yy, where ww is the
LDKC number, xx is the CU number, and yy is the LDEV number.
ww is optional. If ww is omitted, LDKC is assumed to be 0.
The execution results are output in decimal.
Required
devnum
Virtual device number of the virtual LDEV
Specify this parameter as a decimal number or colon-delimited
hexadecimal number in the format ww:xx:yy, where ww is the
LDKC number, xx is the CU number, and yy is the LDEV number.
ww is optional. If ww is omitted, LDKC is assumed to be 0.
The execution results are output in decimal.
If you specify this parameter, you must also specify mapvid for
the vldevoperation parameter.
If you specify mapvid for the vldevoperation parameter and
omit the vdevnum parameter, an unused virtual device number
in the virtual storage machine is assigned.
Optional
vdevnum
Command reference298