HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

An instance of VLDEV
objectID=*****
resourcePartitionUnitID=1
devNum=747
vArrayFamily=P9500
vSerialNumber=53038
vDevNum=0
vEmulation=OPEN-V
vSSID=4
vLUSE=0
vCVS=1
operationMode=0
hasSubstance=0
*****: The values are encoded by the CLI.
GetStorageArray (subtarget=ReplicationInfo)
GetStorageArray (subtarget=ReplicationInfo) obtains information about copy pairs.
NOTE:
• For XP24000/XP20000 and XP12000/XP10000/SVS200, the partitioned storage administrator
cannot obtain all the information about paired volumes and external volumes.
• For XP24000/XP20000, if there is information about copy pairs consisting of mainframe volumes,
microcode version 60-01-6X-XX/XX or later is required. When using an older microcode version
and obtaining copy pair information, the information about copy pairs consisting of mainframe
volumes is output as the information about copy pairs consisting of open volumes.
Parameters
Table 78 GetStorageArray (subtarget=ReplicationInfo) command parameters
DescriptionStatusParameter name
Specify ReplicationInfo.
Required
subtarget
Serial number of the storage system.
If you omit this parameter, all the storage systems become the
target.
You must specify this parameter for Fast Snap, if you specify the
snapshotgrpidfilter or snapshotgrpnamefilter
parameter.
Optional
serialnum
Model of the storage system
If you omit this parameter, all the storage systems become the
target.
You must specify this parameter for Fast Snap if you specify the
snapshotgrpidfilter or snapshotgrpnamefilter
parameter.
Optional
model
Command reference234