HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

num parameters, and HostStorageDomain for the subtarget parameter. In the execution
result of this command, the domainID and portID values appear under An instance of
HostStorageDomain. Use these domainID and portID values to specify the domain and
port parameters respectively.
portname
Obtain this value from the execution result of the GetStorageArray (subtarget=Port)
command. In the execution result of this command, the displayName value appears under An
instance of Port. Use this value to specify the portname parameter.
domainnickname
Obtain this value from the execution result of the GetStorageArray (subtarget=HostStor-
ageDomain) command. Execute this command by specifying only the model and serialnum
parameters, and HostStorageDomain for the subtarget parameter. In the execution result
of this command, the nickname value appears under An instance of HostStorageDomain.
Use this value to specify the domainnickname parameter.
Command execution example
hdvmcli DeleteHostStorageDomain -o "D:\logs\DeleteHostStorageDomain.log"
"serialnum=10001" "model=XP1024"
"port=16" "domain=1" "deletionoption=lusekeep"
Command execution result
RESPONSE:
(Command completed; no data returned)
DeleteLabel
DeleteLabel deletes a label from a logical unit.
Parameters
Table 43 DeleteLabel command parameters
DescriptionStatusParameter name
Serial number of the storage systemRequired
serialnum
Model of the storage systemRequired
model
Command reference140