HP XP P9000 Tiered Storage Manager Software 7.6.1-00 CLI Reference Guide

#2
This property is provided to maintain compatibility with previous versions. To specify a new filter
condition, use SubsystemDisplayModel.
Table 6 Overview of properties that can be specified for pool filter condition expressions
DescriptionProperty name
The unused capacity of the pool
PoolFreeCapacity
The pool number
PoolId
The upper limit for the THP pool over-provisioning percent
OverProvisioningLimit
The over-provisioning percent
The over-provisioning percent indicates the ratio between the THP
pool capacity and the total THP volume capacity allocated to the
THP pool.
OverProvisioningPercent
The threshold for the THP pool over-provisioning percent at which
a warning is issued
OverProvisioningWarning
Table 7 Overview of properties that can be specified for unused capacity filter condition expressions
DescriptionProperty name
The name of a parity group
ArrayGroup
The regions of unused capacity in one or more parity groups
Capacity
The drive capacity (in GB)
DiskCapacityInGB
The drive speed (in rpm)
DiskRPM
The drive type
DiskType
The emulation type of the parity group
EmulationType
The chip type of the flash memory (detailed type)
FDChipType
The RAID level of the parity group
RAIDLevel
The name of the storage system
SubsystemName
The name of the storage system vendor
SubsystemVendor
The total amount of unused capacity in one or more parity groups
TotalFreeCapacity
Range of valid property values
This section provides the ranges of values that can be specified for the properties used in filter condition
expressions specified for given management targets (volumes, pools, or unused capacity).
Property names are not case sensitive.
The specifiable character length is shown as a UTF-8-converted value. (1 to 3 bytes per character.
All ASCII characters are 1 byte each.)
CLI Reference Guide 41