HP XP P9000 Tiered Storage Manager Software 7.6.1-00 CLI Reference Guide

DescriptionItem
The used capacity of the volume (units: KB).
If the volume type is normal, the capacity of the normal volume is
displayed. If the volume type is virtual, the used capacity of the virtual
volume is displayed. If the volume type is pool, nothing is displayed.
consumedCapacityInKB
The ratio (percentage) of consumedCapacityInKB to capa-
cityInKB. If the volume type is pool, nothing is displayed.
consumedCapacityPercentage
The RAID level
RAIDLevel
The drive type
diskType
The chip type of the flash memory (detailed type)
[fdChipType]
Drive speed (rpm)
- is displayed if SSD or FMD is specified for DiskType.
[diskRPM]
Indicates whether the parity group is encrypted. This can be any of
the following:
• Enabled: The parity group is encrypted.
• Disabled: The parity group is not encrypted.
• -: Indicates a THP volume, V-VOL, or LUSE volume. Alternatively,
the encryption feature is not supported.
[encryption]
The drive capacity (units: GB)
[diskCapacityInGB]
The parity group number of the LU in the storage system that stores
the actual data.
[arrayGroupNumber]
The parity group name of the LU in the domain controller
controllerArrayGroupName
The parity group name of the LU in the storage system that stores the
actual data.
arrayGroupName
The parity group usage rate (%). Up to 2 decimal places are displayed.
arrayGroupBusyRate
The maximum parity group usage rate (%). Up to 2 decimal places
are displayed.
arrayGroupMaxBusyRate
The program product volume type.
Only the names of the program products that must be displayed as
LU attributes are displayed.
The same value is displayed for xpSnapshot and fastSnap if the
storage system is HP P9500 and the following conditions are met:
• The volume was a V-VOL before it become part of a Snapshot or
Fast Snap pair.
• The volume is a Snapshot or Fast Snap pool volume.
[program-product-name]
#
(such as businessCopy,
continuousAccessSynchronous,
continuousAccessAsynchronous,
continuousAccessJournal,
xpSnapshot, fastSnap)
The volume type. This can be any of the following:
• -: Normal volumes
• THP-VOL: THP volumes
• THP-Pool-VOL: THP pool volumes
xpThinProvisioning
CLI Reference Guide 153