HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 Administrator Guide

DetailsAttributes
Specify the host name of the Device Manager management server.
The RADIUS server uses this attribute value to identify the management
server. The host name of the management server has been set as the
initial value.
Specifiable values: Specify no more than 253 bytes of the following
characters:
A to Z
a to z
0 to 9
! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ]
^ _ ` { | } ~
Default value: none
attr.NAS-Identifier
#2
Specify the IPv4 address of the Device Manager management server.
The RADIUS server uses this attribute value to identify the management
server.
If the format of the address is invalid, this property is disabled.
Default value: none
attr.NAS-IP-Address
#2
Specify the IPv6 address of the Device Manager management server.
The RADIUS server uses this attribute value to identify the management
server. Enclose the IPv6 address in square brackets ([]).
If the format of the address is invalid, this property is disabled.
Default value: none
attr.NAS-IPv6-Address
#2
Note:
To specify the attributes, use the following syntax:
auth.radius.auth.server.name-property-value.attribute=value
#1:
When linking to an external authorization server that is running on the same computer and using
StartTLS as the protocol for connecting to the LDAP directory server, in the host attribute specify
the same host name as the value of CN in the LDAP directory server certificate. You cannot use
an IP address.
#2:
You must specify exactly one of the following: attr.NAS-Identifier, attr.NAS-IP-Ad-
dress, or attr.NAS-IPv6-Address.
Table 40 Setup items in the exauth.properties file for RADIUS authentication(common settings for the
external authorization server)
DetailsAttributes
Specify the name of a domain managed by the LDAP directory server. This
item is required when an external authorization server is also linked to.
Default value: none
domain.name
Administrator Guide 137