HP XP P9000 Command View Advanced Edition Suite Software 7.6.0-00 CLI Reference Guide

raidType=-
currentPortController=-1
defaultPortController=-1
isComposite=0
continuousAccessVolumeType=Simplex
businessCopyVolumeType=Simplex
snapshotVolumeType=Simplex
journalVolumeType=Simplex
sysVolFlag=0
externalVolume=0
differentialManagement=false
snapshotPoolID=-1
journalPoolID=-1
thpType=0
consumedCapacityInKB=0
thpPoolID=0
threshold=5
tcaPoolID=-1
thpPoolVolControlFlag=-1
managementAreaPoolID=-1
*****: The value is encoded by the CLI.
ShrinkPool
The ShrinkPool command shrinks the THP/Smart pool.
If the unused capacity of the THP/Smart pool is larger than the used capacity, you can use this
command to exclude the THP/Smart pool volumes that compose the THP/Smart pool to decrease the
THP/Smart pool capacity.
To shrink the THP/Smart pool, you can only exclude the THP/Smart pool volumes that are in the status
that enables a pool to be shrunk.
Use the GetPoolShrinkStatus command to make sure that the operation for shrinking the
THP/Smart pool has finished. After the operation for shrinking the THP/Smart pool finishes, the
excluded THP/Smart pool volumes change to normal volumes. Therefore, use the FormatLU command
to format the normal volumes.
NOTE:
This command can be used only with P9500.
Parameters
Table 82 ShrinkPool command parameters
DescriptionStatusParameter name
Serial number of the storage systemRequired
serialnum
Model of the storage systemRequired
model
Pool ID
Specify the pool ID of the THP/Smart pool to be shrunk.
Required
poolid
Command reference248