HP XP P9000 Command View Advanced Edition Suite Software 7.6.0-00 CLI Reference Guide

threshold=10
systemDisk=0
encrypted=0
tieringPolicy=-1
resourcePartitionUnitID=-1
List of 1 FreeSpace elements:
An instance of FreeSpace
objectID=*****
sizeInKB=2,801,729,280
cylinders=0
fsControlIndex=0
*****: The values are encoded by the CLI.
AddVLDEVToVRPU
AddVLDEVToVRPU adds an LDEV to a resource group used for data migrations that use virtual IDs,
and registers the LDEV virtual information. If LDEV virtual information is already registered, the LDEV
virtual information is updated.
NOTE:
• This command can be used only with P9500 with a microcode version of 70-05-04-XX/XX or
later.
• To add multiple LDEVs, use the batch function. For details about the batch function, see Chapter
6 on page 419.
To register and update LDEV virtual information, the LDEV must satisfy the following conditions:
• It is not a pool volume or a journal volume.
• It is not a LUSE volume.
• It does not have a path.
• It is not a command device
• It must be an open volume
• The emulation type must be OPEN-V.
• If an LDEV is to be added to a resource group used for data migrations that use virtual IDs, the
LDEV belongs to a resource group (meta_resource) that is managed by a storage system
management tool and whose resource group ID is 0.
Format
hdvmcli [URL] AddVLDEVToVRPU [options]
model=model serialnum=serial-number
vrpuid=ID-of-a-resource-group-used-for-data-migrations-that-use-virtual-IDs
devnum=Device-number-of-the-LDEV [vdevnum=LDEV-virtual-device-number]
[vemulation=LDEV-virtual-emulation-type] [vssid=LDEV-virtual-SSID]
[vluse=Number-of-virtual-LUSE-elements-of-the-LDEV]
[vcvs={0|1}] [overwrite={true|false}]
Command reference104