HP XP P9000 Command View Advanced Edition Suite Software 7.5.0-00 CLI Reference Guide (TB581-96348, July 2013)

RoleCommand name
Admin or Modify
AddReplication
Admin or Modify
DeleteReplication
Admin, Modify, or View
GetReplicationControllerPair
Admin or Modify
ModifyReplication
Notes on executing CLI commands
Note the following when you execute a CLI command:
Table 19 Notes on executing commands
Related commandsDescriptionItem
AddLun
AddHostStorageDomain
AddWWNForHost
StorageDomain
When adding a LUN or host storage domain,
make sure that I/O operations from the host to
the corresponding port have stopped.
If you add a LUN or host storage domain, the
LUN security for the corresponding port will take
effect automatically. Because of this, when the
command is executed, if I/O operations are
taking place from the host to the port being
added, then the I/O operations might terminate
with an error.
Adding a LUN or host storage
domain
AddWWNForHostStor-
ageDomain
When setting up security for a LUN or host
storage domain, make sure that I/O operations
from the host to the LU of the corresponding port
have stopped.
If you set up security for a LUN or host storage
domain, the LUN security for the corresponding
port will take effect automatically. Because of
this, when the command is executed, if I/O
operations are taking place from the host to the
LU of the corresponding port, then the I/O
operations might terminate with an error.
Setting up security for a LUN or
host storage domain
AddHost
ModifyHost
AddStorageArray
When a CLI command and the GUI are used at
the same time, usable characters for host and
storage system names are the following:
A-Z a-z 0-9 - _ . @
Spaces can also be used, but you cannot use a
name that consists of spaces only.
If characters other than those shown above are
used, GUI operations might not be possible.
Usable characters for host and
storage system names.
AddURLLink
DeleteURLLink
When a CLI command and the GUI are used at
the same time, other Web programs provided
by the GUI might not be able to start. Only a
system administrator who has expert knowledge
can use this combination.
Using URLLink
CLI Reference Guide 43