HP XP P9000 Command View Advanced Edition Suite Software 7.5.0-00 CLI Reference Guide (TB581-96348, July 2013)

VLDEV instance
The VLDEV instance is output when the following commands are executed:
• AddVLDEVToVRPU, page 99
• GetStorageArray (subtarget=LDEV) , page 154
• GetStorageArray (subtarget=LogicalUnit) , page 159
• GetStorageArray (subtarget=VResourcePartitionUnit), page 191
Table 159 VLDEV instance attributes
DescriptionAttribute
Object ID of the VLDEVobjectID
ID of the resource group to which the virtualized resources belong
The ID of the resource group used for data migration using virtual IDs is output.
resourceParti-
tionUnitID
Device number of the LDEV
A combination of a logical DKC number, a CU number, and an LDEV number
(=logical-DKC-number*65536+CU*256+LDEV) is output.
devNum
Family of the virtual storage system
vArrayFamily
Serial number of the virtual storage system
vSerialNumber
Virtual device number of the LDEV
A combination of a logical DKC number, a CU number, and an LDEV number
(=logical-DKC-number*65536+CU*256+LDEV) is output. If there is no virtual
information for the LDEV, -1 is output.
vDevNum
Virtual emulation mode of the LDEV
vEmulation
Virtual SSID of the LDEV
vSSID
Indicates whether a virtual LUSE is set for the LDEV.
• 0: Non-LUSE volume
• 2 to 36: A LUSE volume (with the specified number of volumes)
If there is no virtual information for the LDEV, -1 is output.
vLUSE
Indicates whether the virtual CVS setting is set for the LDEV.
• 0: CVS is not set.
• 1: CVS is set.
If there is no virtual information for the LDEV, -1 is output.
vCVS
CLI Reference Guide 407