HP XP P9000 Command View Advanced Edition Suite Software 7.5.0-00 CLI Reference Guide (TB581-96348, July 2013)

.
. (Attributes of StorageArray are omitted here)
.
List of 1 Lu elements:
An instance of LogicalUnit
objectID=*****
devNum=1,708
displayName=00:06:AC
emulation=OPEN-V
devCount=1
devType=
capacityInKB=1,049,280
path=false
commandDevice=false
commandDeviceEx=0
commandDeviceSecurity=false
chassis=16,485
arrayGroup=0
arrayGroupName=X1-1
raidType=-
currentPortController=-1
defaultPortController=-1
isComposite=0
continuousAccessVolumeType=Simplex
businessCopyVolumeType=Simplex
snapshotVolumeType=Simplex
journalVolumeType=Simplex
sysVolFlag=0
externalVolume=0
differentialManagement=false
snapshotPoolID=-1
journalPoolID=-1
thpType=0
consumedCapacityInKB=0
thpPoolID=0
threshold=5
tcaPoolID=-1
thpPoolVolControlFlag=-1
managementAreaPoolID=-1
*****: The value is encoded by the CLI.
ShrinkPool
The ShrinkPool command shrinks the THP/Smart pool.
If the unused capacity of the THP/Smart pool is larger than the used capacity, you can use this
command to exclude the THP/Smart pool volumes that compose the THP/Smart pool to decrease the
THP/Smart pool capacity.
To shrink the THP/Smart pool, you can only exclude the THP/Smart pool volumes that are in the status
that enables a pool to be shrunk.
Use the GetPoolShrinkStatus command to make sure that the operation for shrinking the
THP/Smart pool has finished. After the operation for shrinking the THP/Smart pool finishes, the
excluded THP/Smart pool volumes change to normal volumes. Therefore, use the FormatLU command
to format the normal volumes.
Command reference242