HP XP P9000 Command View Advanced Edition Suite Software 7.5.0-00 CLI Reference Guide (TB581-96348, July 2013)

Zero-page reclaim operations can be performed on P9500 (with a microcode version of 70-02-
00-XX/XX or later), and XP24000/XP20000.
• The THP/Smart volumes are in a Business Copy Software copy pair.
Zero-page reclaim operations can be performed on P9500 (with a microcode version of 70-05-
02-XX/XX or later ) when the status of the pair volumes is Split (that is, status for the Replic-
ationInfo instance is 16).
You can use the GetZeroPageReclaimStatus command to check whether a zero-page reclaim
operation has finished.
Parameters
Table 82 RunZeroPageReclaim Command Parameters
DescriptionStatusParameter Name
Serial number of the storage systemRequired
serialnum
Model of the storage systemRequired
model
Device number(s) of THP/Smart volume(s)
Specify this parameter as a decimal number or colon-delimited
hexadecimal number in the format ww:xx:yy, where ww is the
LDKC number, xx is the CU number, and yy is the LDEV number.
ww is optional. If ww is omitted, LDKC is assumed to be 0.
Use a comma to delimit multiple values.
Required
devnums
Parameter values to obtain in advance
serialnum and model
Obtain these values from the execution result of the GetStorageArray command. In the execution
result, use the arrayType value or the displayArrayType value to specify the model para-
meter, and use the serialNumber value to specify the serialnum parameter.
devnums
Obtain this value from the execution result of the GetStorageArray (subtarget=LDEV)
command. Execute this command by specifying only the model and serialnum parameters,
and LDEV for the subtarget parameter. In the execution result of this command, the devNum
value of an LDEV appears under An instance of LDEV. Use this devNum value to specify
the devnums parameter.
Command execution example
hdvmcli RunZeroPageReclaim -o "D:\logs\RunZeroPageReclaim.log"
model=XP24000 serialnum=10007 devnums=06:AC
Command execution result
RESPONSE:
An instance of StorageArray
CLI Reference Guide 241