HP XP P9000 Command View Advanced Edition Suite Software 7.5.0-00 CLI Reference Guide (TB581-96348, July 2013)

DescriptionStatusParameter name
Number of LDEVs for which information is to be obtained
Specify this parameter when you want to obtain virtual information
about only some of the LDEVs in a specific storage system.
If you specify this parameter, you must also specify the model,
serialnum, vrpusubinfo, and startVldevElement
NumFilter parameters. For the vrpusubinfo parameter, specify
VLDEV.
The maximum recommended value is 4096.
Optional
numOfVldevEle-
mentsFilter
Parameter values to obtain in advance
serialnum and model
Obtain these values from the execution result of the GetStorageArray command. In the execution
result, use the arrayType value or the displayArrayType value to specify the model para-
meter, and use the serialNumber value to specify the serialnum parameter.
vrpuid
Obtain this value from the execution results of the GetStorageArray (subtarget=VResource-
PartitionUnit) command. Execute this command by specifying only the model and serial-
num parameters, and VResourcePartitionUnit for the subtarget parameter. All information
related to VResourcePartitionUnit in the specified storage system can be obtained. In the
execution results of this command, the required resourcePartitionUnitID value appears
under An instance of VResourcePartitionUnit. Use this value to specify the vrpuid
parameter.
Command execution example
In this example, the GetStorageArray (subtarget=VResourcePartitionUnit) command
obtains information about a resource group (resource group number: 1) used for data migrations that
use specific virtual IDs in a storage system (serial number: 53038; model: VSP).
hdvmcli GetStorageArray -o "D:\logs\GetStorageArray_VResourcePartitionUnit.log"
"subtarget=VResourcePartitionUnit" "model=VSP" "serialnum=53038" "vrpuid=1"
"vrpusubinfo=VPort,VHostStorageDomain,VLDEV"
Command execution result
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 1 VResourcePartitionUnit elements:
An instance of VResourcePartitionUnit
objectID=****
name=hdlmgroup1
resourcePartitionUnitID=1
vArrayFamily=****
vSerialNumber=10007
virtualStorageMode=enable
Command reference194