HP XP P9000 Command View Advanced Edition Suite Software 7.5.0-00 CLI Reference Guide (TB581-96348, July 2013)

Obtain these values from the execution result of the GetStorageArray command. In the execution
result, use the arrayType value or the displayArrayType value to specify the model para-
meter, and use the serialNumber value to specify the serialnum parameter.
Command execution example
In this example, the GetStorageArray (subtarget=TieringPolicy) command obtains
information about the tiering policy with ID 10 (policyid: 10) for a storage system (serial number:
53039; model: P9500).
hdvmcli GetStorageArray -o "D:\logs\GetStorageArray_TieringPolicy.log"
subtarget=TieringPolicy model=P9500 serialnum=53039 policyid=10
Command execution result
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 1 TieringPolicy elements:
An instance of TieringPolicy
objectID=*****
policyID=10
allocationThresholdT1Max=50
allocationThresholdT1Min=20
allocationThresholdT3Max=40
allocationThresholdT3Min=10
numberOfVVols=4
*****: The values are encoded by the CLI.
GetStorageArray (subtarget=VResourcePartitionUnit)
The GetStorageArray (subtarget=VResourcePartitionUnit) command obtains information
about resource groups used for data migration using virtual IDs. The resource groups used for data
migration using virtual IDs are managed by a storage system management tool.
NOTE:
The command can obtain information only when you are using P9500 with a microcode version of
70-03-30-XX/XX or later.
Parameters
Table 67 GetStorageArray (subtarget=VResourcePartitionUnit) command parameters
DescriptionStatusParameter name
Specify VResourcePartitionUnit.
Required
subtarget
CLI Reference Guide 191