HP XP P9000 Command View Advanced Edition Suite Software 7.5.0-00 CLI Reference Guide (TB581-96348, July 2013)

DescriptionStatusParameter name
Filter for selecting a logical unit
Available values are ALL, ASSIGNED, FREE, UNASSIGNED, and
RESERVED.
If you omit this parameter or specify ALL, you will obtain
information about all the logical units.
If you specify ASSIGNED, you will obtain the information about
the logical units that have a LUN assigned.
If you specify FREE, you will obtain the information about logical
units that do not have a LUN assigned.
If you specify UNASSIGNED, among the information about the
logical units that do not have a LUN assigned, you will obtain
the information about the logical units to which a LUN can be
assigned by using Device Manager.
If you specify RESERVED, among the information about the logical
units that do not have a LUN assigned, you will obtain the
information about the logical units to which a LUN cannot be
assigned by using Device Manager.
Optional
lufilter
Filter for selecting a logical unit
Specify the object ID of the LDEV.
Only the logical units corresponding to the LDEV of the specified
object ID are returned. Specify the object ID obtained from another
CLI response. The value is encoded by the CLI.
Optional
lufilterchil-
did
Specific information about the logical unit
The values you can specify are Path, LDEV, and
VolumeConnection. If you specify multiple values at the same
time, separate values by commas.
Optional
lusubinfo
Object ID of the logical unit
Specify this parameter when you want to obtain information about
a specific logical unit. If you specify this parameter, you must also
specify the model and serialnum parameters. If you specify
the model and serialnum parameters, and omit the objectid
parameter, information about logical units in the specified storage
system is obtained. Specify the object ID obtained from another
CLI response. The value is encoded by the CLI.
Optional
objectid
Specific information about the logical unit path
The value you can specify is HostInfo or WWN.
If you specify this parameter, you must also specify
lusubinfo=Path.
Optional
pathsubinfo
Information about the LDEV
You can specify VolumeConnection or VLDEV. To specify
multiple values at the same time, separate each value with a
comma.
You can specify VLDEV only for P9500 with a microcode version
of 70-03-30-XX/XX or later.
If you specify this parameter, you must also specify the
lusubinfo=LDEV.
Optional
ldevsubinfo
Command reference160