HP XP P9000 Command View Advanced Edition Suite Software 7.5.0-00 CLI Reference Guide (TB581-96348, July 2013)

#
Do not set saobjid together with serialnum and model. Doing so will result in an error.
Omitting all three parameters will cause all of the storage systems to be targeted.
Parameter values to obtain in advance
serialnum and model
Obtain these values from the execution result of the GetStorageArray command. In the execution
result, use the arrayType value or the displayArrayType value to specify the model para-
meter, and use the serialNumber value to specify the serialnum parameter.
saobjid
Obtain this value from the execution result of the GetStorageArray command. Set the value
of objectID, obtained from the execution result, into the saobjid parameter.
Command execution example
In this example, the GetStorageArray command obtains information about the configuration of
all the storage systems.
hdvmcli GetStorageArray
Command execution result
RESPONSE:
An instance of StorageArray
objectID=*****
name=R600@10.208.115.220
description=R600 (10007) at 10.208.115.220
serialNumber=10007
arrayFamily=XP24K/20K
arrayType=XP24000
microcodeVersion=60-06-20/00
agentVersion=05_06_00
productName=RAID600
controllerVersion=60-06-21-00/00
numberOfControllers=2
capacityInGB=6,617
cacheInMB=65,536
sharedMemoryInMB=-1
numberOfSpareDrives=-1
freeCapacityInGB=3,765
allocatedCapacityInGB=2,851
autoLunCapacityInGB=0
onDemandCapacityInGB=0
totalFreeSpaceInGB=3,438
largestFreeSpaceInGB=466
capacityInKB=6,938,910,203
freeCapacityInKB=3,948,652,130
allocatedCapacityInKB=2,990,258,073
autoLunCapacityInKB=0
onDemandCapacityInKB=0
totalFreeSpaceInKB=3,605,150,982
largestFreeSpaceInKB=489,664,512
CLI Reference Guide 133