HP XP P9000 Command View Advanced Edition Suite Software 7.5.0-00 Administrator Guide (Web Version) (TB581-96346, July 2013)

NOTE:
If you changed the value of this property, the following settings must be performed:
• Use the netsh command to reset the firewall exemptions (when the value of the hdc.ssl.secure
property is 2 or 3).
• Set the same value as the hdc.rmiserver property of the Device Manager server (when SSL
communication is used by Host Data Collector and the Device Manager server).
Related topics:
• Registering an exception for the Host Data Collector service (for SSL communication), page 277
• hdc.rmiserver, page 372
• hdc.ssl.secure, page 398
hdc.common.https.serverPort
Specify the SSL communication port number of the class loader.
Specifiable range: 1 to 65535.
Default: 22106
NOTE:
If you changed the value of this property, the following settings must be performed:
• Use the netsh command to reset the firewall exemptions (when the value of the hdc.ssl.secure
property is 2 or 3).
• Set the same value as the hdc.classloader property of the Device Manager server (when SSL
communication is used by Host Data Collector and the Device Manager server).
Related topics:
• Registering an exception for the Host Data Collector service (for SSL communication), page 277
• hdc.classloader, page 373
• hdc.ssl.secure, page 398
hdc.service.fileCleanup.startTime
Specify the time at which host information files that Host Data Collector collected from managed hosts
are deleted, in the format hhmm.
Specify a value from 00 to 23 for hh, and 00 to 59 for mm.
Default: 2300
hdc.adapter.esx.timeout
Specify the timeout value, in seconds, for Host Data Collector to acquire information from a managed
virtualization server.
Administrator Guide (Web Version) 397