HP XP P9000 Command View Advanced Edition Suite Software 7.5.0-00 Administrator Guide (Web Version) (TB581-96346, July 2013)

NOTE:
If you changed the value of this property, the following settings must be performed:
Use the firewall_setup command to reset the firewall exemptions (when the value of the
hdc.ssl.secure property is 1 or 2).
Set the same value as the hdc.classloader property of the Device Manager server (when
non-SSL communication is used by Host Data Collector and the Device Manager server).
Related topics:
Registering an exception for the Host Data Collector service (for non-SSL communication), page 276
hdc.classloader, page 373
hdc.ssl.secure, page 398
hdc.common.rmi.ssl.registryPort
Specify the SSL communication port number of the RMI registry.
Specifiable range: 1 to 65535.
Default: 22104
NOTE:
If you changed the value of this property, the following settings must be performed:
Use the netsh command to reset the firewall exemptions (when the value of the hdc.ssl.secure
property is 2 or 3).
Set the same value as the hdc.rmiregistry property of the Device Manager server (when SSL
communication is used by Host Data Collector and the Device Manager server).
Related topics:
Registering an exception for the Host Data Collector service (for SSL communication), page 277
hdc.rmiregistry, page 371
hdc.ssl.secure, page 398
hdc.common.rmi.ssl.serverPort
Specify the SSL communication port number of the RMI server.
Specifiable range: 1 to 65535.
Default: 22105
Host Data Collector properties396