HP XP P9000 Command View Advanced Edition Suite Software 7.5.0-00 Administrator Guide (Web Version) (TB581-96346, July 2013)

NOTE:
• When using one of the following OSs on the host, execute Device Manager agent commands
from the WOW64 command prompt:
Windows Server 2003 R2 (x64)
Windows Server 2008 (x64 and IPF)
Windows Server 2008 R2 (x64 and IPF)
Windows Server 2012 (x64)
The following shows an example of executing from the command prompt:
C:\WINDOWS\SysWOW64\cmd.exe
• In Windows, the folder in which the Device Manager agent commands are installed is automatically
added to the environment variable PATH. When you execute a command, you do not need to
change the current folder to the folder that contains commands.
firewall_setup command
If the host OS is Windows, the firewall_setup command is used to register the ports used by the
Device Manager agent as firewall exceptions. The firewall_setup command is stored in the
following locations:
installation-folder-for-Device-Manager-agent\bin\firewall_setup.bat
The following table describes the firewall_setup command syntax.
Table 94 firewall_setup command syntax
DetailsItem
firewall_setup {-set|-unset}
Synopsis
Registers the following ports used by the Device Manager agent in a Windows environment
as firewall exceptions:
• Port set for the server.agent.port property (default: 24041/tcp)
• Port set for the server.http.port property (default: 24042/tcp)
• Port set for the server.http.localPort property (default: 24043/tcp)
This operation requires Administrator privileges. If the OS is Windows Server 2008, Windows
Server 2008 R2 or Windows Server 2012, the command must be executed from a command
prompt started as an Administrator.
Description
-set
Adds firewall exceptions.
-unset
Removes firewall exceptions.
Options
hbsa_modinfo command
The hbsa_modinfo checks the available agent functions (add-on modules). The hbsa_modinfo
command is stored in the following locations:
In Windows:
Administrator Guide (Web Version) 255