HP XP P9000 Command View Advanced Edition Suite Software 7.5.0-00 Administrator Guide (Web Version) (TB581-96346, July 2013)

Item
Version
timeoutpollserviceip_address
YesYes
Only supports port num-
ber specification.
Supports IP address, host
name, and NONE.
5.8
YesYes
Only supports port num-
ber specification.
Supports IP address and
host name.
Earlier than 5.7
Legend:
Yes: Supports all description formats.
Related topics:
• Editing the configuration definition file, page 242
• Description conventions for the configuration definition file, page 243
• Notes on using the configuration definition file, page 254
• HORCM_INST parameter description format, page 251
HORCM_CMD parameter description format
Specify a command device for the storage system in the HORCM_CMD parameter.
• dev_name
Specify a command device that is recognized by the host. You can specify more than one command
device in the same system, and you can specify a command device in more than one system.
In Windows, you can specify a command device in IPCMD format, PhysicalDrive format, GUID
format, or CMD format.
IPCMD format
\\.\IPCMD-IP-address-of-the-virtual-command-device-port-number[-unit-
ID-of-the-storage-system]
PhysicalDrive format
\\.\PhysicalDrivedisc-number-defined-by-Windows
For the Device Manager agent 1.1 or earlier, this item is case sensitive.
GUID format
\\.\Volume{GUID}
CMD format
\\.\CMD-serial-number[-logical-device-number[-port-name[-host-group-
number]]]
You must use base-10 numbers to specify the serial number and logical device number. For
the host group number, if the version of the Device Manager agent is 5.6 or later, specify a
value from 0 to 254. If the version of the Device Manager agent is 5.5 or earlier, specify a
value from 0 to 127.
In UNIX, you can specify a command device in IPCMD or CMD format, or in a special file.
IPCMD format
\\.\IPCMD-IP-address-of-the-virtual-command-device-port-number[-unit-
ID-of-the-storage-system]
CMD format
Using and maintaining the Device Manager agent246