HP StorageWorks XP Tiered Storage Manager Server Installation and Configuration Guide (December 2005)

Windows System Installation 24
Figure 2-15 Installation Finished Window
Figure 2-16 Installation Stopped (Cancel) Window
Figure 2-17 Installation Stopped (Error) Window
2-2-2 Setting up a Windows Firewall
If Windows Firewall is enabled, you need to add Tiered Storage Manager to the Windows Firewall exceptions
list to operate Tiered Storage Manager.
To add Tiered Storage Manager to the Windows Firewall exceptions list:
1. Use the following command to add Tiered Storage Manager to the Windows Firewall exceptions list:
netsh firewall add allowedprogram program="installation-folder-for-Tiered-
Storage-Manager\bin\htsmService.exe" name="Tiered Storage Manager"
mode=ENABLE
2. Use the following command to check the registered contents:
netsh firewall show all
From the command execution results, ensure that:
• Tiered Storage Manager is displayed.
• the mode is Enable.
• the path for htsmService.exe is correct.
3. Use the following command to cancel an entry in the exceptions list:
netsh firewall delete allowedprogram program="installation-folder-for-Tiered
Storage-Manager\bin\htsmService.exe"
2-2-3 Upgrading or Reinstalling the Tiered Manager Server and Command
View XP AE Suite Common Component
WARNING!
•
Do not use the Windows Services Panel to start or stop Command View XP AE Suite software.
• Do not install Tiered Storage Manager and Tuning Manager (large database) on the same server.
Before you begin the reinstallation or upgrade installation, you should verify the following: