HP StorageWorks XP Replication Monitor software installation and configuration guide (T1784-96008, November 2006)

Changing the configuration of XP Replication Monitor software 67
4-1-3 Procedure for adding an information source
The procedures for adding a Device Manager server or a Business Continuity Manager as an information source
and for setting the link that enables an information source's applications to be called from the web client are the
same as for initial setup. See section
3-4 .
4-1-3-1 Adding a Device Manager server
The procedure for adding a Device Manager server to the system as an information source is the same as the
procedure for registering an information source at the time of initial setup. For details, see section
3-4-1 .
4-1-3-2 Adding a Business Continuity Manager
The procedure for adding a Business Continuity Manager to the system as an information source is the same as
the procedure for registering an information source at the time of initial setup. For details, see section
3-4-2 .
4-1-3-3 Specifying the settings for calling an information source's applications from the web
client (hcmdslink command)
To enable an information source's applications to be called from the web client, you must set a link to the
information source (URL of the information source's server) in the dialog box that appears by choosing Go and
then Links from the global tasks bar area. You use the hcmdslink command to set this link. For details about the
operation, see the manual HP StorageWorks Command View XP Advanced Edition software Device Manager
server installation and configuration guide.
4-1-4 Specifying the refresh function
You can specify whether automatic refresh is to be performed and, if so, the information collection interval. These
settings are described in this section.
Collecting configuration information
You can set and change the collection interval and the collection start time for each information source.
Collecting information related to copy pair status
You can set and change the collection interval.
• If the information source is a Device Manager server, you can set and change the collection interval for
each pair management server and for each information source. In the case of an information source,
you can specify settings for the agent and for the Device Manager server, depending on the target
copy pair.
• If the information source is a Business Continuity Manager, you can set and change the collection
interval for each information source.
The procedure for specifying the refresh settings is the same as for initial setup. See section
3-5 for the following
procedures:
• Setting the interval for collecting configuration information
• Setting the interval for collecting copy pair status information for each information source
• Setting the interval for collecting copy pair status information for each pair management server (open
systems only)
For details about the procedures, see the applicable subsections in section
3-5 .
4-1-5 Setting up LUN security XP extension
You can specify settings for saving the following six types of data:
• Alert history
• Write delay time data (C/T delta) for open systems
• Write delay time data (C/T delta) for mainframe systems
• Event log
• Side file and journal volume usage for open systems
• Side file and journal volume usage for mainframe systems
You can specify separately whether to save data of each data type. If you decide to save a type of data, you can
set the following items:
• Retention period (number of days the data is to be retained)