HP StorageWorks XP Replication Monitor software installation and configuration guide (T1784-96008, November 2006)

Establishing XP Replication Monitor software initial settings 60
Figure 3-15 Dialog box for setting copy pair status monitoring (Device Manager server)
4. If you do not want copy pair status information to be collected automatically from the agent, select the
Disable periodical refresh checkbox under Refresh Interval Settings for Agent.
If you select this checkbox, Interval becomes inactive, so skip to step 6.
5. Enter the number of minutes for the collection interval in Interval under Refresh Interval Settings for Agent.
NOTE: The collection interval you set here overwrites the value set for each host (pair management
server).
6. If you do not want copy pair status information to be collected automatically from the Device Manager
server, select the Disable periodical refresh checkbox under Refresh Interval Settings for Device Manager.
If you select this checkbox, Interval becomes inactive, so skip to step 8.
NOTE: If all the copy pairs you want to monitor are managed under a pair management server, specify
this setting so that copy pair status information is not collected automatically from the Device Manager
server.
7. Enter a collection interval hour and minute in Interval under Refresh Interval Settings for Device Manager.
8. If you do not want a Device Manager refresh to occur when you collect copy pair status information
manually, select Do not execute a Device Manager refresh operation during a manual refresh operation.
NOTE: If all the copy pairs you want to monitor are managed under a pair management server, specify
this setting so that a Device Manager server refresh operation does not occur.
9. Click the OK button.
The dialog box for setting the copy pair status information collection interval closes.
To set the interval for collecting copy pair status information for a Business Continuity Manager:
1. From the Explorer menu, click Settings and then Refresh Setting.
2. From the object tree or application area, click Monitoring Setting.
The application area displays a list of information sources including the Periodical Interval and Manual
Refresh settings associated with collection of copy pair status information.
3. From the list of information sources, click the icon of a Business Continuity Manager.
A dialog box appears for setting the copy pair status information collection interval for the selected
information source.