HP StorageWorks XP Replication Monitor software installation and configuration guide (T1784-96008, November 2006)

Establishing XP Replication Monitor software initial settings 59
3-5-1 Setting the interval for collecting configuration information
To set the interval for collecting configuration information from an information source:
1. From the Explorer menu, select Settings and then Refresh Setting.
2. From the object tree or application area, select Configuration Setting.
The application area displays a list of information sources including the Interval, Start Time, and Last
Refresh settings associated with the collection of configuration information.
3. From the list of information sources, click the icon of the information source whose collection interval you
want to set.
A dialog box for setting the collection interval and start time for the selected information source appears.
Figure 3-14 Dialog box for setting the collection interval and start time
4. Select the collection interval from the Interval drop-down list.
5. Select the collection start time hour from the Start Time drop-down list, and then enter the collection start
time minute (0-59).
6. Click the OK button.
The dialog box for setting the collection interval and start time closes.
3-5-2 Setting the interval for collecting copy pair status information for an
information source
This section explains two procedures for setting the interval for collecting copy pair status information for an
information source: (1) the procedure for a Device Manager server and (2) the procedure for a Business
Continuity Manager.
To set the interval for collecting copy pair status information for a Device Manager server:
1. From the Explorer menu, select Settings and then Refresh Setting.
2. From the object tree or application area, select Monitoring Setting.
The application area displays a list of information sources including the Periodical Interval and Manual
Refresh settings associated with the collection of copy pair status information.
3. From the list of information sources, click the icon of a Device Manager server.
A dialog box for setting the copy pair status information collection interval for the selected source appears.