HP StorageWorks XP Replication Monitor software installation and configuration guide (T1784-96008, November 2006)

Creating a cluster environment 102
NOTE: Do not place the following resources offline:
- Shared disk
- Cluster management IP address
- Virtual host name
If the shared disk, cluster management IP address, or virtual host name is placed offline, uninstallation will
fail.
2. On the executing node, execute the following command to stop the Common Component services:
"C:\Program Files\CVXPAE\Base\bin\hcmdssrv" /stop
3. In the Cluster Administrator window, place the following service offline:
HiRDB/ClusterService_HD0
4. In the Cluster Administrator window, right-click the services that were placed offline in steps 1 and 3, select
Property, click the Advanced tab, select Do not restart, and then click OK.
5. On both the executing and standby nodes, uninstall the XP Replication Monitor server.
For details about uninstallation, see section
2-3-3 .
6. Change the services that were set to Do not restart in step 4 back to Restart.
7-3 Changing XP Replication Monitor software to a cluster
environment after starting operation
Each of the following sections explains how to build a cluster configuration from an environment where XP
Replication Monitor software is already in operation in a noncluster configuration.
Also, when you are changing the environment from a non-cluster configuration to a cluster configuration, always
obtain a backup of the database. For details on how to backup, see section
3-8 .
To execute the commands and operations described in this section, an administrator group user must be logged
in to the system.
7-3-1 Setting up a cluster environment by using MSCS (for a Windows
management server)
7-3-1-1 Settings on the executing node
This subsection explains how to specify settings for a cluster environment in the executing node in Windows.
The following procedures assume that cluster software and a shared disk are ready and that the management
server with the XP Replication Monitor server already set up is set to be the executing node in a cluster
configuration. It is also assumed that the Common Component services have already started.
To specify settings for a cluster environment in the executing node in Windows:
1. When other Command View XP AE Suite products are in operation, stop the service tasks of those
Command View XP AE Suite products and services of Common Component (HBase Storage Mgmt Web
Service and HBase Storage Mgmt Common Service).
For details about how to stop other Command View XP AE Suite product services, see the corresponding
product manual.
To stop HBase Storage Mgmt Web Service and HBase Storage Mgmt Common Service, execute the
following command:
Common-Component-installation-folder\bin\hcmdssrv /stop