HP StorageWorks P9000 Tiered Storage Manager Software 7.1.1 CLI Reference Guide (TB585-96014, September 2011)

DescriptionItem
The elapsed time from the start of the task execution for each volume.
This value is displayed in hhhh:mm:ss format.
If the elapsed time is 10,000 hours or more, 9999:59:59 is displayed. If the
elapsed time cannot be acquired, n/a is displayed. If the task is not executed,
nothing is displayed.
timeElapsed
Output items (external mapping task)
Table 73 Items output by the GetTasks command (external mapping task) (Task instance)
DescriptionItem
The task ID.
The task ID format is TK########. The time and serial number are converted to
base 36 and displayed in the format ########.
ID
The type of task (ExternalMapping)taskType
The task status
For details on the values displayed, see “Task statuses” on page 177.
status
The date and time when the task was created
creationTime
The execution request date and time for the task
executionRequest-
Time
The date and time when task execution started
startTime
The elapsed time from the starting point of the task execution.
This value is displayed in hhhh:mm:ss format.
If the elapsed time is 10,000 hours or more, 9999:59:59 is displayed. If the
elapsed time cannot be acquired, n/a is displayed. If the task is not executed,
nothing is displayed.
timeElapsed
The date and time when task execution ended
endTime
The user ID of the user who created the task
ownerID
The name of the storage domain
storageDomainName
The serial number of the storage system containing the volume
[subsystemSerial-
Number]
The display model name of the storage system containing the volume
[subsystemDisplay-
Model]
The name of the storage system containing the volume
[subsystemName]
The vendor name of the storage system containing the volume
[subsystemVendor]
The total capacity of the volume to be externally connected in GB. Values of less
than 1 GB are rounded down and displayed as an integer (for example, 4.5 GB
is rounded down to 4 GB).
totalCapacityInGB
Details of CLI commands136