HP StorageWorks P9000 Tiered Storage Manager Software 7.1 CLI Reference Guide (TB585-96011, May 2011)

DetailsParameter
Specify the charge target for the cost of normal volume.
• Allocated: The volume capacity allocated to the host
• Utilized: The volume capacity actually used by the host
You can specify an empty string for this parameter. If you specify an empty string,
the old settings will be deleted.
If you specify an empty string for this parameter, also specify an empty string for
the newcost parameter.
[newchargefor]
#1
Specify the cost of THP volumes.
The method to specify this parameter is the same as for the newcost parameter.
You can specify an empty string for this parameter. If you specify an empty string,
the old settings will be deleted.
If you specify an empty string for this parameter, also specify an empty string for
the newthpchargefor parameter.
[newthpcost]
#2
Specify the charge target for the cost of the THP volume.
• Allocated: The THP volume capacity allocated to the host
• Consumed: The THP volume capacity that has already been consumed
• Utilized: The THP volume capacity actually used by the host
You can specify an empty string for this parameter. If you specify an empty string,
the old settings will be deleted.
If you specify an empty string for this parameter, also specify an empty string for
the newthpcost parameter.
[newthpchargefor]
#2
Legend:
[ ]: Specifying this parameter is optional.
#1
Specify these parameters so that, after the ModifyStorageTier command is executed, either
both the cost of normal volumes and the charge target for the cost of normal volumes are set or
neither is set.
#2
Specify these parameters so that, after the ModifyStorageTier command is executed, either
both the cost of THP volumes and the charge target for the cost of THP volumes are set or neither
is set.
Output items
The items output by the ModifyStorageTier command are the same as the items output by the
CreateStorageTier command. For more information, see “Output items” on page 67 of the
CreateStorageTier command.
Example and execution results
• Command execution example (1):
In this example, the name of the storage tier MyStorageTier in the storage domain MegaT-
echXP12000-Primary is changed to OurStorageTier.
CLI Reference Guide 79