HP StorageWorks P9000 Tiered Storage Manager Software 7.1 CLI Reference Guide (TB585-96011, May 2011)

Status of the specified volumeDisplayed character string
Cache Residency Manager or Cache Residency
Manager for Mainframe is set for the volume.
Cache LUN XP
The volume is used as a command device.
Command Device
The volume is one of the following:
• The volume is part of a Continuous Access pair,
and the status is neither PSUS nor PSUE.
• The volume is part of a Hitachi TrueCopy for
Mainframe pair, and the status is not suspended.
• The volume is in an XP12000/XP10000/SVS200,
and a part of an XP Continuous Access Software
pair, and the status is PAIR.
• The volume is in an XP12000/XP10000/SVS200,
and a part of a Hitachi TrueCopy for Mainframe
pair, and the status is Duplex.
Continuous Access Asynchronous Status
< Continuous Access XP Asynchronous
Status >
The volume is one of the following:
• The volume is part of a Continuous Access Journal
pair, and the status is either COPY or PAIR.
• The volume is part of a Hitachi Universal Replicator
for Mainframe pair, and the status is either
Pending duplex or Duplex.
• The volume is a Continuous Access Journal volume.
• The volume is a Hitachi Universal Replicator for
Mainframe volume.
Continuous Access Journal Status
< Continuous Access XP Journal Status >
The volume is one of the following:
• The volume is part of a Continuous Access pair,
and the status is other than PSUS , PSUE, or PAIR.
• The volume is part of a Continuous Access Syn-
chronous pair, and the status is not suspended.
• The volume is in an XP12000/XP10000/SVS200,
and a part of an XP Continuous Access Software
pair, and the status is PAIR.
• The volume is in an XP12000/XP10000/SVS200,
and a part of a Hitachi TrueCopy for Mainframe
pair, and the status is Duplex.
Continuous Access Synchronous Status
< Continuous Access XP Synchronous
Status >
The volume is using the external storage system func-
tion, which is locked by Data Retention Utility (not
Read/Write).
Externally Locked
The volume is a volume for which the FCoE path is
set.
FCoE Path
The volume has already been reserved as a migration
target.
This includes the volumes migrated by Performance
Monitor.
Migration Reserved
Information for the volume cannot be acquired.
Not Acquired Volume Information
CLI Reference Guide 231