HP StorageWorks P9000 Tiered Storage Manager Software 7.1 CLI Reference Guide (TB585-96011, May 2011)

Specify true to use SSL communication. If you do not want to use SSL communication, specify
something other than true or nothing at all.
For details about the settings for using SSL communication, see “Setting up SSL
communication” on page 28.
parameter.parameter-name property
This property specifies the value of a command parameter. Values specified here are applied to all
commands.
For details about how to specify the value of each command parameter, see “Command
parameters” on page 36, and the details about each command.
Specifying properties for the trace log in the
htsmclienv.properties file
In the htsmclienv.properties file, each type of value for the CLI log output function can be set
to a property.
NOTE:
Note the following on characters specified in the htsmclienv.properties file:
• Property values can only be used and printed out when ASCII characters are used. (\u0020 to
\u007E are recognized as ASCII characters.)
• Property names are case sensitive.
The following table shows an example of the CLI log information output settings in the
htsmclienv.properties file.
Table 100 Example settings of property values in the htsmclienv.properties file
ValueProperty
20logger.tracelogLevel
5logger.fileCount
3MBlogger.maxFileSize
(absolute path)
C:\\TieredStorageManager\\
Tiered-Storage-Manager-version\\CLI\\logs\\
HTSMCLITrace
(relative path)
logs\\HTSMCLITrace
logger.filePath
The following shows an example of the above properties and values.
CLI Reference Guide 215