HP StorageWorks P9000 Tiered Storage Manager Software 7.1 CLI Reference Guide (TB585-96011, May 2011)

The output items described in Table 71 and Table 72 below are output only if the -d or --detail
option is specified.
Table 71 Items output by the GetTasks command (volume creation task) (ErrorInfo instance)
DescriptionItem
The error message
message
Table 72 Items output by the GetTasks command (volume creation task) (VolumeCreationInfo instance)
DescriptionItem
The logical device number of the volume
The number is displayed as a decimal number or a value that is a combination of
hexadecimal values and colons (:). If multiple numbers exist, they are delimited
by commas.
deviceNumber
The parity group name of the volume
arrayGroupName
The amount of the unused capacity in the volume parity group
freeSpaceIndex
The serial number on the external storage system side
externalSubsystem-
SerialNumber
The display model name on the external storage system side
externalSubsystem-
DisplayModel
The storage system name as viewed from the external storage system
externalSubsystem-
Name
The vendor name on the external storage system side
externalSubsystem-
Vendor
The number of volumes specified when the task was created
numberOfVolumes
The emulation type specified when the task was created
emulationType
The volume capacity in KB. Only the value is displayed.
capacityInKB
The status of the volume creation task for each volume
For details on the values displayed, see “Task statuses” on page 207.
status
The elapsed time from the start of the task execution for each volume.
This value is displayed in hhhh:mm:ss format.
If the elapsed time is 10,000 hours or more, 9999:59:59 is displayed. If the
elapsed time cannot be acquired, n/a is displayed. If the task is not executed,
nothing is displayed.
timeElapsed
CLI Reference Guide 149