HP StorageWorks P9000 Replication Manager Software 7.1.1 Configuration Guide (TB584-96029, September 2011)

Database and backup server requirements
This section describes database and backup server requirements. File systems are only supported
using the Application Agent CLI.
NOTE:
When using IPv6, both IPv4 and IPv6 must be enabled on the database and backup servers. You can
use IPv6 addresses only if they are global addresses.
Table 23 Database and backup server requirements (File systems)
Required programsIPv6 supportOperating system
P9000 RAID Manager
Logical Volume Manager (Windows
LDM
3
or Veritas Volume Manager for
Windows
4
)
Application Agent v 7.0 or later
NWindows Server 2003 SP2
N
Windows Server 2003 SP2 (IPF)
1
NWindows Server 2003 SP2 (64-bit)
YWindows Server 2003 R2 SP2
YWindows Server 2003 R2 SP2 (64-bit)
P9000 RAID Manager
Logical Volume Manager (Windows
LDM
3
)
Application Agent v 7.0 or later
YWindows Server 2008 no SP or SP1
YWindows Server 2008 SP2
Y
Windows Server 2008 IPF no SP or SP1
1
Y
Windows Server 2008 IPF SP2
1
YWindows Server 2008 no SP or SP1 (64-bit)
YWindows Server 2008 SP2 (64-bit)
Y
2
Windows Server 2008 R2 no SP
Y
Windows Server 2008 R2 IPF no SP
1
P9000 RAID Manager
Volume Manager
(Windows LDM
3
)
Application Agent v 7.1
Y
2
Windows Server 2008 R2 IPF SP1
1
Y
Windows Server 2008 R2 IPF SP1
1
Notes:
1. Backup using VSS is not supported.
2. Communication using IPv6 is supported even when using FTP with the CLI. For details, see the
HP StorageWorks P9000 Software Replication Manager Application Agent CLI User Guide.
3. LDM basic disks are supported.
Configuration Guide 53