HP StorageWorks P9000 Replication Manager Software 7.1 CLI Reference Guide (TB584-96021, May 2011)

3. The command brings the disk resource online.
If ONLINE is set for the CLU_MSCS_RESTORE environment variable in the Application Agent
configuration definition file (init.conf), restoration can be performed while the cluster resources
are online when you restore a volume within a cluster group in an MSCS environment.
Restoration overwrites the entire primary volume with the entire secondary volume that contains a
backup of the primary volume. Therefore, additions and changes to the primary volume after the
backup was created are not applied.
Before executing this command, all application software using the volume to be restored must be
stopped. The volume being used by the operating system cannot be restored.
This command should be used to restore the primary volume to the secondary volume. This command
should not be used when data is being backed up from the secondary volume to a tape device with
the drmmediabackup command, when data is being restored from a tape device to the secondary
volume with the drmmediarestore command, or when the secondary volume is being mounted
with the drmmount command.
If the partition style of the physical disk is changed after a backup, and the command is then executed,
the command result will vary as described in the following table.
Table 29 Physical disk partition style and command execution results
Command execution resultAfter a backupBefore a backup
Command statusSecondary volumePrimary volumePrimary volume
Normal terminationMBR disk
MBR disk
MBR disk
Error message (KAVX5171-E or
KAVX5137-E)
After resynchronizing
#1
GPT disk
Error message (DRM-10337)
Before resynchronizing
#2
MBR disk
GPT disk
Error message (DRM-10337)
Before resynchronizing
#2
GPT disk
Error (DRM-10337 message)
Before resynchronizing
#2
MBR disk
MBR disk
GPT disk
Error message (DRM-10337)
Before resynchronizing
#2
GPT disk
Error message (KAVX5171-E or
KAVX5137-E)
After resynchronizing
#1
MBR disk
GPT disk
Normal terminationGPT disk
#1
The error message is displayed after resynchronizing.
#2
The error message is displayed before resynchronizing.
Basic commands100