HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 CLI Reference Guide (TB581-96066, September 2011)

4 Command reference
This chapter describes the syntax and parameters of Device Manager CLI commands with execution
examples.
Storage system commands
The storage system commands can be used to register, modify, and delete storage system information.
AddArrayReservation
AddArrayReservation locks the target storage system.
When a storage system is locked, you can execute storage system commands and LUN commands.
You can execute the GetStorageArray command even if another user has locked the storage
system. If you do not change the storage system configuration or execute the
ModifyArrayReservation command within five minutes after locking the storage system, the
storage system will be unlocked.
CLI Reference Guide 39