HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 CLI Reference Guide (TB581-96066, September 2011)

DescriptionAttribute
Capacity of the hardware tier (KB)
This value does not match the total capacity of the pool volumes for Smart Tiers
because the pool of Smart Tiers uses a control area.
capacityInKB
Unused capacity of the hardware tier (KB)
freeCapacityInKB
Usage rate of the hardware tier
usageRate
RAID level (example: RAID6 or RAID1+0)raidLevel
Combination of data drives and parity drives in a RAID configuration.
This item is output as xD+yP or as xD+xD.
• xD: Number of data drives
• yP: Number of parity drives
Unknown is output if the combination is unknown.
combination
Drive revolutions per minute
rpm
Type of the drive
• -1: Unknown
• 1: SATA
• 4: SAS
• 5: SSD
diskType
Indicates whether the volumes that make up the hardware tier are internal or
external volumes:
• -1: Unknown
• 0: Internal volume
• 1: External volume
substance
Port instance
The Port instance is output when the following commands are executed:
• “GetStorageArray (subtarget=Port) ” on page 156
• “ModifyPort” on page 179
Table 132 Port instance attributes
DescriptionAttribute
Object ID of the port
objectID
Port name
This item is output if it has been registered.
name
Port ID
portID
Port type (example: Fibre)portType
Output items318