HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 CLI Reference Guide (TB581-96066, September 2011)

DescriptionAttribute
Percentage of the size used by the host in regards to the total size of logical units
allocated to the logical group
percentUsed
Number of LUNs allocated to the logical group
This item indicates the total number of LUNs allocated to the lower-level logical
groups.
numberOfLUNs
LogicalUnit instance
The LogicalUnit instance is output when the following commands are executed:
• “AddExternalArrayGroup” on page 41
• “AddLogicalUnit” on page 54
• “AddLUSE” on page 60
• “AddPool” on page 64
• “AddVirtualVolume” on page 76
• “FormatLU” on page 95
• “GetHost” on page 223
• “GetPoolShrinkStatus” on page 100
• “GetStorageArray (subtarget=ArrayGroup) ” on page 111
• “GetStorageArray (subtarget=LogicalUnit) ” on page 134
• “GetStorageArray (subtarget=Pool) ” on page 149
• “GetStorageArray (subtarget=ReplicationInfo) ” on page 161
• “GetZeroPageReclaimStatus” on page 165
• “ModifyLogicalUnit” on page 169
• “ModifyPool” on page 171
• “ModifyVirtualVolume” on page 187
• “RunZeroPageReclaim” on page 193
• “ShrinkPool” on page 194
Table 123 LogicalUnit instance attributes
DescriptionAttribute
Object ID of the logical unit
objectID
Name of the logical unit
This item is output if it has been registered.
name
Number of the LDEV contained in the logical unit
For P9500 or XP24000/XP20000, a combination of a logical DKC number, a
CU number, and an LDEV number
(=logical-DKC-number*65536+CU*256+LDEV) is output.
For XP12000/XP10000/SVS200 and XP1024/XP128, a combination of a CU
number and an LDEV number (=CU*256+LDEV) is output.
devNum
Display name of the logical unit
displayName
CLI Reference Guide 303