HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 CLI Reference Guide (TB581-96066, September 2011)

DescriptionAttribute
Usage of the THP volume (KB)
One of the following values is output for P9500 or XP24000/XP20000:
• When the LDEV is not a THP volume: The same value as sizeInKB
• When the LDEV is a THP volume: Usage of the Thin Provisioning volume
For P9500 or XP24000/XP20000, note the following points on the value that is
output for THP volume usage:
• When the THP volume has not been assigned to a THP pool, 0 is displayed.
• When the operator is the partitioned storage administrator, -1 is displayed.
• The capacity of the THP volume is allocated from a THP pool in tens of MB, so
when the usage of the THP volume reaches 100%, the value of consumed-
SizeInKB might not be equal to the value of sizeInKB.
• This value might greatly increase depending on the combination of the file
system and the OS of a host that uses the THP volume. For details, see the THP
manual.
-1 is output for other storage systems.
consumedSizeInKB
Volume type of Hitachi TrueCopy for Mainframe Software or Hitachi TrueCopy
Asynchronous for Mainframe Software
• Unknown: Unknown
• Simplex: Not a Hitachi TrueCopy for Mainframe Software volume or Hitachi
TrueCopy Asynchronous for Mainframe Software volume
• P-VOL
• S-VOL
mfTrueCopyVolume-
Type
Volume type of Hitachi ShadowImage for Mainframe Software
• Unknown: Unknown
• Simplex: Not a Hitachi ShadowImage for Mainframe Software volume
• P-VOL
• S-VOL
• SP-VOL
mfShadowImageVolume-
Type
Volume type of Hitachi Universal Replicator for Mainframe Software
• Unknown: Unknown
• Simplex: Not a Hitachi Universal Replicator for Mainframe Software volume
• P-VOL
• S-VOL
• MF-JNL: Journal volume
mfUniversalReplicat-
orVolumeType
Pool ID of LDEV
One of the following values is output for P9500, XP24000/XP20000, or
XP12000/XP10000/SVS200:
• When the LDEV is the P-VOL, S-VOL, or SP-VOL of Hitachi Universal Replicator
for Mainframe Software: Pool ID of the pool used by the logical unit
• When the LDEV is a pool volume: Pool ID of the pool to which the LDEV has
been assigned
In other cases, -1 is output.
mfUniversalReplicat-
orPoolID
Output items300