HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 CLI Reference Guide (TB581-96066, September 2011)

DescriptionAttribute
LDEV name
This item is output if it has been registered.
name
Device number of the LDEV
For P9500 or XP24000/XP20000, a combination of a logical DKC number, a
CU number, and an LDEV number
(=logical-DKC-number*65536+CU*256+LDEV) is output.
For XP12000/XP10000/SVS200 or XP1024/XP128, a combination of a CU
number and an LDEV number (=CU*256+LDEV) is output.
devNum
Display name of the LDEV
displayName
Emulation mode
This item is output for P9500, XP24000/XP20000, XP12000/XP10000/SVS200,
or XP1024/XP128 (example: OPEN-8).
emulation
Number of cylinders in the LDEV
For P9500, XP24000/XP20000, XP12000/XP10000/SVS200, or
XP1024/XP128:
• When a mainframe volume or intermediate volume is used: Number of cylinders
in the LDEV
• When an open volume is used: 0
cylinders
Indicates whether the LDEV is used on a LUSE volume:
• 0: Not a LUSE volume
• 1: LUSE volume
isComposite
LDEV size (in KB)
sizeInKB
Number of LBAs
lba
RAID level of the LDEV
RAID levels are output in the format RAIDx(yD+zP).
• RAIDx: RAID level
• yD: Number of data drives
• zP: Number of parity drives
For example, RAID5(3D+1P) indicates a RAID5 configuration consisting of three
data drives and one parity drive.
raidType
Indicates whether the volume is internal or external:
• 0: Internal volume
• 1: External volume
substance
CLI Reference Guide 297