HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 CLI Reference Guide (TB581-96066, September 2011)

journalPoolID=-1
thpType=0
consumedCapacityInKB=0
thpPoolID=0
threshold=15
tcaPoolID=-1
thpPoolVolControlFlag=-1
*****: The value is encoded by the CLI.
Command execution example 2
TBD
TBD
Command execution result 2
TBD
*****: The value is encoded by the CLI.
RefreshStorageArrays
The RefreshStorageArrays command refreshes storage system configuration information.
For storage systems that are managed by Device Manager, configuration information that is created
or modified from the Remote Console, Remote Web Console, or RAID Manager is added to or updated
in the Device Manager server database each time this command is executed. Execute this command
regularly to keep the Device Manager server database up to date.
NOTE:
To refresh only one storage system, use the AddStorageArray command. When the storage system
already exists, the AddStorageArray command performs a re-discovery operation on the storage
system and refreshes the registered information on the Device Manager server database.
Parameters
Table 71 RefreshStorageArrays command parameter
DescriptionStatusParameter name
Either of the following values can be specified to determine how
storage systems are refreshed:
• 1: Refreshes storage systems sequentially.
• 2: Refreshes multiple storage system in parallel.
The default is 1.
Optional
refreshmode
CLI Reference Guide 191